"Kamyabi Ke Rang Engineer Plus Painting Solution" Make a Call to us - +91-9229182999

a b c d e f

Engineer Plus Super Acrylic Paint-(SAP-99)

SAP99 : Engineer plus SAP-99 is a special preparation for wall coating based on pure acrylic emulsion for healthy and hygienic living along with long lasting, excellent weather ability ,dirt free protective & attractive finish. Resistance to water, alkali with maintenance free clean & bright surface.

Advantage & Key Features:-

  • Outstanding antifungal & antibacterial.
  • Outstanding water resistance.
  • Excellent resistance to dirt pick up.
  • Excellent alkali resistance.
  • Excellent abrasion.
  • Stain resistance.
  • High UV and exterior durability, equally good in interior.
  • Spectrum of colours can be developed.
  • 5 yrs performance warranty.

For Best Result & Surface preparation :

  • Before application insure that the new concrete is cured minimum for 60 days.
  • Clean the surface from oil, dust, fungus, grass, roots, rust & loose material etc by wire brush. If required do vacuum cleaning.
  • Priming:

  • For getting the best result, prime the surface with EAP-99 (Engineer Plus Acrylic Primer) & dry for 6 hours. More absorbent surfaces require two coats of primer.
  • Use ASP-99(Acrylic super putty) for good finish & to undo imperfection of wall.
  • Application:

  • Open the container of SAP-99 stir well before use.
  • Apply two coats of SAP-99 by brush or roller within interval of 6 hours.
  • Open the container of SAP-99 stir well before use.
  • Insists for 3 coats of SAP-99 on horizontal exterior surface.
  • Precautions

    • Do not apply on unsound and very smooth surface,
    • Do not apply on hot or wet surface.
    • Do not apply SAP-99 when ambient temperature is below 10°C and above 45°C.

    Area of Application :

    Masonry surface, concrete, asbestos sheet, cement sand renderings etc.

    Preparation before painting

    • Newly plastered surface must be allowed to cure completely before painting.
    • Paint should not be applied on surfaces/subtracts which are subjected to continuous seepage or dampness.
    • Application of Exterior wall primer is mandatory for all surfaces. Not doing so can lead to failure of the paint film.
    • Dark shades in exterior emulsion will need at least 3 coats of application for proper hiding.
    • More absorbent surfaces may require two coats of primer.

    Tips for painting

    • Insists recommended number of primer and top coats.
    • Ensure coverage does not exceed more than 10 % of recommended figure.
    • Insist on 3 coats of paint on horizontal surface ,surface of exteriors
    • Allow enough time for curing and drying.
    • Coverage approx 8 - 10 sq.mtr. per kg (depends on surface)


    The product information & application details has been given in good faith and as a general guideline. The company does not assume any liability for unsatisfactory results and damage.



    Customer Speak

    We've been with Engineer Plus for almost more than a 10 year now, they have been very reliable and Best Products. Have not had any problems yet. We recommend them as a reliable and affordable.

    MR. Anil Chabbra