Anti-corrosives / Protective Coatings

 
 
 
 
 

ICO Dampcoat

Water Based Epoxy Sealer Membrane


Description

A two part chemically cured, water based epoxy sealer membrane for most porous building components.


Uses

For curing, seepage and dampness problems on interior or exterior surfaces of basements, tunnels, lift wells, retaining walls, floors, below grade car parks, etc. Excellent on fresh concrete after it has hardened and is ideal as waterproofing membrane on concrete floor slabs under carpets and other floor coverings.


Area of Applications

  • Cured membrane will withstand approx. 2.5 kg/cm² hydrostatic pressure or equivalent to a 25 metres head of water.
  • Can be applied onto damp surfaces.
  • Does not impair bond of subsequent adhesives or paints.
  • May be tinted with universal paint tints.
  • Non flammable, odorless and low toxicity.
  • Can be applied to interior or exterior surfaces.

ICO Sipel/Sipel S

Silicone Masonry Water Repellent Agent For Impregnation Of Exterior Walls


Description

ICO SIPEL/ICO SIPEL-S is supplied as a ready-to-use water/solvent based colorless liquid silicone which, when applied, creates a highly water repellent surface.


Uses

SIPEL/SIPEL-S is applied on siliceous/mineral surfaces especially on exterior building brickwork, concrete cement/sand rendering, plastering, natural or cast stone. It reduces the phenomenon of efflorescence due to soluble salts in brickwork. It protects the surface from exterior aggression.


Features

  • Ready-to use by brush or spray directly from container.
  • Most effective on any siliceous surface, old or new.
  • Inhibits dampness on walls due to capillary action.
  • Self-clearing reduces unsightly staining, unaffected by salt laden atmosphere.
  • Reduces risks of efflorescence, lime erosion, rust staining, direct collection, formulation of mild dew, moss lichen and frost spalling.
  • Protects concrete from aggressive action of de-icing salts.
  • Preserves natural colour and texture of treated substrates. Allows surface to breathe. Good on cement paint too.

ICO Sealocote

Clear Acrylic Resin Based Water Repellent Coating


Description

Clear, acrylic resin based water repellent coating for exterior exposed surfaces.


Uses

Water repellent. Suitable for concrete block, concrete, brick, stone, cement plaster. Prevents moisture damage to interior surfaces such as plaster cracking and paint blistering. Will also restore colour and reseal all panels.


Features

  • Quick action-block work becomes highly water repellent in 2 or 3 hours.
  • Long lasting-tests show years of dependable protection.
  • Seals surface-moisture completely excluded. Protective seal prevents stain
    and dirt penetration.
  • Reduces weather staining-vertical surfaces tend to be self cleaning.
  • Invisible-causes no change in appearance of the surface coated.
  • Film will not yellow or darken on aging.* Low temperature application-may be applied at temperature down to freezing.

ICO Corchem 210 I

High Build Elastomeric Polyurethane Protective Coating


Description

CORCHEM 210 I is a solventless two component elastomeric heavy-duty aromatic polyurethane membrane. CORCHEM 210 I is designed to provide exceptional protection for surfaces subject to movement or cracking in severe chemical and physical environments. CORCHEM 210 I conforms to ASTM D16 Type V.


Uses

Concrete storage reservoirs, cooling tower basin, containment areas, concrete piping and handling fresh and brine waters and water solutions containing industrial waste, salts, detergents, many acids, alkalis and other chemicals. Provides a high degree of protection against corrosive moisture, fumes, chlorine, carbon dioxide, hydrogen sulphide and methane gases.


Features

  • CORCHEM 210 (I) performs under highly aggressive environment.
  • CORCHEM 210 (I) is ideal for use on concrete surfaces.
  • CORCHEM 210 (I) is very versatile in use and application.
  • CORCHEM210 (I) coating provides an impermeable, anti corrosive, chemical and salt resistant environment.
  • CORCHEM210 (I) provides a hard, tough yet flexible finish with a longer life.

ICO Guard-S & WS

High Performance Aliphatic Acrylate-Based Protective And Decorative Coating


Description

The ICO GUARD-S system comprises a single component penetrating silane /siloxane based primer and a single component pigmented coating both ready for immediate site use.
ICO GUARD-S is an aliphatic acrylate; solvent based protective coating, providing an outstanding resistance to aggressive elements, UV-light and rain. It is available in a selected range of colours.


Uses

Protects atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, sulphates, oxygen and water. The product is also suitable to protect other cementitious substrates and masonry. ICOGUARD-S is suitable for use on all types of structures, especially those in aggressive marine and coastal environments. It is equally suitable for new and existing structures.


Features

  • Excellent barrier to carbon dioxide, chloride ions, sulphates, oxygen and water.
  • Highly UV-resistant aliphatic acrylate gives exceptional resistance to the effects of long term weathering.
  • Highly durable in all climatic conditions
  • Selected range of decorative colours.
  • Ease of application-single pack-no mixing of separate components

ICO Thermoseal-XL

Thermal Insulating Elastomeric Paint for Roofs and Walls


Description

THERMOSEAL – XL is water based elastomeric high build paint for concrete roofs and exterior walls. THERMOSEAL – XL is heavily filled with specially selected hollow ceramic micro sphere and titanium di oxide.


Function

THERMOSEAL – XL has dual effects. Firstly, it reflects more than 80% of sun rays thereby heating of roof surface reduces remarkably due to high amount of Titanium di oxide. Secondly, transfer of heat from roof surface is blocked due presence of ceramic micro sphere. When it is applied on exterior side walls and roof it reduces energy cost approximately 20%.



Area of Application

THERMOSEAL – XL is applied in areas such as walls and roofs of residential houses, industrial & commercial structures, cold storages, etc.


Features

  • Cured film is highly elastomeric in nature thereby very high degree of crack bridging capability.
  • Aliphatic polymer is used therefore no effect on UV rays.
  • Effective both in hot or cold climates.
  • Reduces heating and cooling demands.
  • Saves energy and utility costs by reducing heating/cooling demands.
  • Safe & Non Toxic.
  • Easy to apply.
  • Zero VOC (volatile Organic Compound).
  • Excellent adhesion with most of the building materials.

ICO Thane TCE

High Performance Pu Coating for Walls and Floors


Description

ICO THANE-TCE is a two component aliphatic elastomeric PU coating system for waterproofing, dust proofing of concrete walls floors and ceilings. It is resistant to corrosion, chemical attack and abrasion.


Uses

The cured film protects atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, sulphates, oxygen and water. The product is also suitable to protect other cementitious substrates and masonry. ICO THANE- TCE is also suitable for use on all types of structures, especially those in aggressive marine and coastal environments. It is equally suitable for new and existing structures. ICO THANE- TCE is used to protect reservoirs, tanks, silos, water treatment works, breweries, dairies and meat and food processing plants. The cured film is non-toxic and meets the requirements of IS : 9833 - 1981.


Features :

  • Can be applied all types cementitious and mild steel surfaces
  • Applied cured material forms a smooth glossy impervious surface.
  • Excellent abrasion and impact resistance.
  • Excellent resistance to chemical attack including various acids, alkali, organic solvent.
  • Does not corrode.
  • Cured film is Non-toxic.
  • UV - resistant

ICO Poxy TC 200

Solvent Less High Performance Epoxy Coating for Walls and Floors


Description

ICO POXY- TC is a two component solvent free epoxy coating system for waterproofing, dust proofing of concrete walls floors and ceilings. It is resistant to corrosion, chemical attack and abrasion.


Uses

The cured film protects atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, sulphates, oxygen and water. The product is also suitable to protect other cementitious substrates and masonry. ICO POXY- TC is also suitable for use on all types of structures, especially those in aggressive marine and coastal environments. It is equally suitable for new and existing structures. ICO POXY- TC is used to protect reservoirs, tanks, silos, water treatment works, breweries, dairies and meat and food processing plants. The cured film is non-toxic and meets the requirements of IS : 9833 - 1981.


Advantages

  • Can be applied all types cementitious and mild steel surfaces
  • Applied cured material forms a smooth glossy impervious surface.
  • Excellent abrasion and impact resistance.
  • Excellent resistance to chemical attack including various acids, alkali, organic solvent.
  • Does not corrode.
  • Cured film is Non-toxic due to solvent less system and use of food grade pigments.